FW811 FIRE ALARM INPUT MODULE It is an intelligent addressable module and takes one address on the Signaling Line Circuit (SLC) of the fire alarm control panel. VIEW DATASHEET FIRE ALARM INPUT MODULE The input module FW811 monitors a single dry contact and is a UL/ULC listed device according to UL864 and ULCS527 for fire protective signaling systems for indoor use. Capabilities The FW811 input module can be configured to be a supervisory, trouble or monitor signal which will produce an event when a signal input appears on its associated contact. The device LED will indicate the event condition by red steady on. Compliance UL864 / ULC S527 Alarm Events An module input will produce an ALARM event when an alarm generating contact device is activated. The device LED will indicate the alarm condition by red steady on. MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718 Compatible with 10K Ohms end of line resistor (FW421) Surface mount with FW800/FW801 base

FW129 REMOTE LED FIRE ALARM ANNUNCIATOR The FW129 LED Annunciator is used to display zone events from the fire alarm control panel. It comes with a lockable glass door. A sliding paper strip is used to show zone messages. VIEW DATASHEET ADDRESSABLE REMOTE COMPACT ANNUNCIATOR The FW129 is connected to the control panel via the external network to form an emergency detection and notification network system. Capabilities The FW129 can show up to 30 zones for alarm/trouble events display and control. lt also comes with 35 zones for alarm/trouble events display. Compliance UL/ULC/FM Listed Reliable and Secure It is protected by a lockable cover MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Datasheet Installation Manual Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718 Digital signal processor-based design Communication with the fire alarm panel is via a CAN bus (individual address). The annunciator is supplied with a PC board, trouble buzzer, cable and terminals.

6-FM-12 12V12Ah ​ ​ VIEW DATASHEET ​ ​ ​ ​ ​ ​ ​ ​ MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718

FW521 ADDRESSABLE HEAT DETECTOR It responds quickly and dependably to a broad range of fires. Thanks to its Microcontroller Unit (MCU), Maple Armor heat detector makes a complete comprehensive self-diagnostic test and result analysis. VIEW DATASHEET PHOTOELECTRIC SMOKE DETECTOR The Heat Detector FW521 is addressable, intelligent and UL and ULC listed device according to UL 521 and ULC-S530 for Fire Protective Signaling Systems for indoor use with both fixed-temperature alarm and rate-of-rise alarm characteristics. Capabilities The FW521 is intelligent, addressable, and takes one address on the Signaling Line Circuit (SLC) of the fire alarm control panel. Compliance UL/ULC/FM/FCC Listed Design The heat detector has a slim design that combines visual appeal with a high standard of reliability. MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718 The heat fire alarm has a Microcontroller Unit (MCU) performing comprehensive self-diagnostic tests, and result analysis. Voltage Range: 17.6 to 25.5VDC Fixed Temperature Rating: 135°F (57.5°C) Rate-of-Rise Detection: 15°F min. (8.3°C min.) Ceiling Mounting

FW811M FIRE ALARM MINI-INPUT MODULE The Mini input module FW811M monitors a single dry contact and is a UL/ULC listed device according to UL864 and ULC-S527 for fire protective signaling systems for indoor use. VIEW DATASHEET FIRE ALARM INPUT MODULE It is an intelligent addressable module and takes one address on the Signaling Line Circuit (SLC) or Data Communication Link (DCL) of the fire alarm control panel. Capabilities The FW811M Input Module is designed to be inserted into a single gang utility box next to the dry contact device that it is monitoring. Compliance UL864 / ULC S527 Alarm Causing An alarm causing input will produce an ALARM event. The remote red LED will indicate the alarm condition by turning on steady. MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718 Compatible with 10K Ohms end of line resistor (FW421) Compatible with FW561-RI remote LED indicator

FW6000-B12350 ​ ​ VIEW DATASHEET ​ ​ ​ ​ ​ ​ ​ ​ MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718

FW6000-B1270 ​ ​ VIEW DATASHEET ​ ​ ​ ​ ​ ​ ​ ​ MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718

FIRE ALARM MODULES Maple Armor provides you with a wide range of easy-to-use fire alarm modules. Our fire alarm modules are FM, UL, and ULC listed devices for fire protection and fire signaling systems. ABOUT OUR PRODUCTS Maple Armor provides you with nothing but reliable, robust and cost-effective fire alarm devices. All our equipment is UL, ULC, FCC listed as well as FM approved and conform to the highest standards of life safety and property loss prevention. LEARN MORE FW859 SYNC MODULE Sync Module is a device designed with FW961/FW971/FW981 Horn and/or Strobe Built-in synchronization circuit to synchronize multiple FW961s in a complete fire alarm system Up to 64 Notification Appliance Circuits (NAC), networked, stand alone or interfacing with the FW951 LEARN MORE FW951 IN-SUITE ISOLATOR MODULE Up to two Class A/B outputs Supervised and isolated outputs 200ma per output White surface box available as an option (FW800/801) No LED indicator LEARN MORE FW851 ISOLATOR MODULE The isolation module isolates the short point on the signaling line circuit (SLC) The internal relay will be triggered to cut down the line power where the short trouble is detected LEARN MORE FW841 CONV. ZONE MODULE 2-wire CLASS A/B conventional detectors Counts for 35 unit loads White surface box available as an option (FW800/801) Status LED indicator It is a UL listed product according to UL864 and ULC-S527 LEARN MORE FW831 RELAY MODULE UL / ULC listed product according to UL864 and ULC-S527 for fire protective signaling systems for indoor use Provides two control relay outputs which will be activated simultaneously LEARN MORE FW821 I/O MODULE Input-Output module UL / ULC listed device according to UL864 and ULC-S527 for fire protective signaling systems for indoor use Provides one 24VDC output and in addition monitoring for one feedback input contact LEARN MORE FW812 DUAL INPUT MODULE Internal electronic address Compatible with EOLR 10K Ohms (FW421) White Surface box available as an option (FW800/801) 4 types of input contact 2 Status LED indicators Supports two Class B input circuits LEARN MORE FW811M MINI-INPUT MODULE Input module that monitors a single dry contact UL/ULC listed device according to UL864 and ULC-S527 for fire protective signaling systems for indoor use The field circuit is monitored for open line faults and ground faults and the contact must be wired with an end of line resistor LEARN MORE FW811 INPUT MODULE Input module that monitors a single dry contact UL/ULC listed device according to UL864 and ULCS527 for fire protective signaling systems for indoor use The field circuit is monitored for open line faults and ground faults and the contact must be wired with an end of line resistor LEARN MORE FW435 MODULE BOX 2 mounting plates on hinges Accommodates up to 8 regular modules per box Accommodates up to 32 mini modules per box Integrated flange for semi-flush installation LEARN MORE FW434 MODULE BOX 2 mounting plates on hinges Accommodates up to 16 regular modules per box Accommodates up to 64 mini modules per box Integrated flange for semi-flush installation LEARN MORE

FW982 MULTI CANDELA STROBE The FW982 strobe produces a flash rate of one flash per second over the Regulated Voltage Range. It offers superior performance, including low power consumption and long operating life. VIEW DATASHEET MULTI-CANDELA STROBE The FW982 Fire Alarm Strobe is part of a family of multi-candela visual and/or audible signal appliances with light sources generated from white Light Emitting Diodes (LEDs), listed according to UL 1971, UL 1638, UL 464, ULC-S525, and ULC-S526 for indoor use. Capabilities The LED light source in this fire alarm strobe offers superior performance, including low power consumption and long operating life. Compliance UL/ULC Listed Output Five levels of light output are selectable. The default setting is highest level. MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718 The strobe alarm is equipped with a function to synchronize multiple strobes within a complete fire alarm system. Wall or Ceiling Mounting

FW973 ADDRESSABLE FIRE NOTIFICATION HORN The FW973 has the intelligence to report its location (the device address) and status to the FireWatcher® series fire alarm control panels. VIEW DATASHEET ADDRESSABLE HORN The FW973 Horn is an addressable audible signal device listed according to UL 464 and ULC-S525 for indoor use. Capabilities The temporal tone generated by the horn is designed as per ANSI and NFPA72 for standard emergency evacuation signaling requirements. Compliance UL/ULC Listed Addressable The alarm horn has a feature that can synchronize multiple horns in a complete fire alarm system. MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718 The device can synchronize multiple horns in a complete fire alarm system. Wall or Ceiling Mounting

FW6000-B12420 ​ ​ VIEW DATASHEET ​ ​ ​ ​ ​ ​ ​ ​ MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718

FW123 REMOTE LCD FIRE ALARM ANNUNCIATOR The Addressable Fire Alarm Annunciator FW123 is designed to be used with the FW106 or the FW106S control panels. The LCD can display 8 simultaneous events. Users can browse more events by pressing the up/down buttons. VIEW DATASHEET INTELLIGENT REMOTE COMPACT ANNUNCIATOR The FW123 is connected to the FW106/FW106S series panels via the external CAN network, and it is powered by an external 24 VDC power source from the panel. Up to 109 FW123 remote annunciators can be connected. Capabilities Supports up to 109 annunciators. Compliance UL/ULC/FCC Listed Reliable and Secure Fully configurable from the panel with password protection MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718 24VDC operation Up to 4 Annunciators for each panel Large 7″ LCD display with 800×480 resolution Available in Red or Dark Grey Circuit topology supports Class B The annunciator has 6 auxiliary function keys