top of page

FW831

RELAY MODULE

The FW831 is an addressable relay module that provides two control relay outputs which will be activated simultaneously. The active status of the relay output is indicated by flashing red LED.

FIRE ALARM RELAY MODULE

The FW831 is an addressable module and takes one address on the addressable loop (ALU) of the fire alarm control panel. It is a UL listed product according to UL864 and ULC-S527 for Fire Protective Signaling Systems for indoor use. Relays are form-C with all contacts accessible.

Capabilities

The relay alarm module FW831 provides two control relay outputs which will be activated simultaneously. When the outputs are activated, the device LED will indicate the event condition by fast blinking.

Compliance

UL864 / ULC S527

Output Configurations

It supports both normally closed and normally open output contact configurations.

  • The relay model contact Rating: 30VDC 2A, 0.35pf

  • Operating Temperature: 32°F to 120°F (0°C to 49°C)

  • Operating Humidity: 0% to 93% RH

  • Voltage Range: 15 to 28VDC

  • Mounting: FW800 Base

bottom of page