FW841

FireWatcher 841

CONVENTIONAL ZONE MODULE

The FW841 is an addressable conventional zone module that is intended to interface and monitor 2-wire Class A/B conventional detectors in retrofit or other applications.

Certifications
FW841

Fire Alarm Conventional Zone Module

The initiating zone can support a mix of two-wire conventional automatic detectors as well as normally open dry contact alarm initiating devices such as conventional heat detectors and manual stations.
R

Capabilities

Useful for retrofit applications
R

UL/ULC Approved

UL864 / ULC S527
R

Verification

Alarm Verification is not permitted when 2-wire detectors are mixed with dry contact alarm initiating devices on the IDC. Alarm Verification is permitted when only compatible smoke detectors are connected to the IDC.
  • Operating Voltage Regulated: 24VDC, Power Limited
  • Operating Temperature: 0° to 49°C (32° to 120°F)
  • Operating Humidity: 0% to 93% RH
  • Wire Size: 12 to 18AWG
  • Location: Indoor use only

Datasheet and Installation Manuals

Case Studies / Projects

Customer Support

Email: info@maplearmor.com
Phone: +1 (514) 631-3131
Phone: +1 (844) 988-8866

Check out other Maple Armor products

FW106

Fire Alarm Control Panel -FW106

The FW106 FireWatcher® panel is an addressable fire alarm control panel designed for small to medium scale facilities. It is ideally suited for both new and retrofit commercial, institutional, and industrial fire detection and notification applications.

FW562

Addressable Duct Smoke Detector - FW562

The FW562 is a photoelectric duct smoke detector without a relay designed to provide early detection of smoke and / or the presence of combustion products in the ventilation system.

FW722

Addressable Manual Station - FW722

The FW722 (English) and FW722C (English/French) addressable manual stations are UL listed devices, according to UL 38 and ULC-S528 for Fire Protective Signaling Systems, for indoor use.