FW831

FireWatcher 831

RELAY MODULE

The FW831 is an addressable relay module that provides two control relay outputs which will be activated simultaneously. The active status of the relay output is indicated by flashing red LED.

Certifications
FW831

Fire Alarm Relay Module

The FW831 is an addressable module and takes one address on the addressable loop (ALU) of the fire alarm control panel. It is a UL listed product according to UL864 and ULC-S527 for Fire Protective Signaling Systems for indoor use. Relays are form-C with all contacts accessible.
R

Capabilities

The relay alarm module FW831 provides two control relay outputs which will be activated simultaneously. When the outputs are activated, the device LED will indicate the event condition by fast blinking.
R

UL/ULC Approved

UL864 / ULC S527

R

Output Configurations

It supports both normally closed and normally open output contact configurations.

  • The relay model contact Rating: 30VDC 2A, 0.35pf
  • Operating Temperature: 32°F to 120°F (0°C to 49°C)
  • Operating Humidity: 0% to 93% RH
  • Voltage Range: 15 to 28VDC
  • Mounting: FW800 Base

Datasheet and Installation Manuals

Case Studies / Projects

Customer Support

Email: info@maplearmor.com
Phone: +1 (514) 631-3131
Phone: +1 (844) 988-8866

Check out other Maple Armor products

FW521

Addressable Heat Detector - FW521

It responds quickly and dependably to a broad range of fires. Thanks to its Microcontroller Unit (MCU), Maple Armor heat detector makes a complete comprehensive self-diagnostic test and result analysis.

FW129

Remote LED Annunciator - FW129

The FW129 LED Annunciator is used to display zone events from the fire alarm control panel. The FW129 comes with a lockable glass door. A sliding paper strip is used to show zone messages.

FW972M

In-Suite Mini Horn - FW972M

The FW972M Mini Horn is a conventional audible signal appliances that operate on Maple Armor’s NAC, listed according to UL 464 and ULC-S525 for indoor use.